
Roof Deicing Designed for Asphalt Roof Shingles
Calorique’s PerfectlyClear Roof Deicing is the most advanced ice dam prevention solution on the market today. Our unique heating panels feature a thin profile. When installed, they are completely concealed underneath the asphalt shingle. The roof deicing heating panels are available in various standard lengths to provide for any configuration.
The modular design allows the roofing contractor to easily plug heating panels together positioning them in and around problem areas. The panels are easily installed as a “Retro Fit” under existing shingles, or at New Shingle Installation. Our roof deicing products provide ice dam prevention for valleys too.
Installation is easy – By removing the underside release liner and firmly pressing down, the heating panel locks securely in place. Removing the top release liner strip, seals the panel to the next course of shingles.
Simple, fast and easy ! PerfectlyClear Roof Deicing combined with PerfectlyClear Gutter and Downspout Heat Ribbons plus an optional automated controller/snow sensor, protects buildings against dangerous ice build-up – safely and efficiently.

Features:
- Prevents Ice Dams from Forming
- For New or Existing Asphalt Roofs
- Retro Fit installation is completely concealed
- No Nailing Required
- ETL Intertek Listed
- 15 year Limited Warranty
- Certified to withstand 110 MPH Winds
- Completely Waterproof
- Easy to Install
- 120V and 240V
- Less than 10 Watts per linear foot
- Maintenance Free
Product | Length | Width | Volts | Watts | Amps | Certification |
PCR5-28W120V | 3′ | 5″ | 120V | 28.07 | 0.233 | ETLus |
PCR5-38W120V | 4′ | 5″ | 120V | 38.07 | 0.317 | ETLus |
PCR5-48W120 | 5′ | 5″ | 120V | 48.07 | 0.4 | ETLus |
PCR5-98W120V | 10′ | 5″ | 120V | 98.07 | 0.817 | ETLus |
PCR5-198W120V | 20′ | 5″ | 120V | 198.07 | 1.65 | ETLus |
PCR5-248W120V | 25′ | 5″ | 120V | 248.07 | 2.067 | ETLus |
PCRV10-69W120V | 3′ | 10″ | 120V | 68.64 | 0.742 | ETLus |
PCRV10-113W120V | 5′ | 10″ | 120V | 113.27 | 0.942 | ETLus |
PCRV10-233W120V | 10′ | 10″ | 120V | 233.04 | 1.942 | ETLus |
PCR5-28W240V | 3′ | 5″ | 240V | 28 | 0.117 | ETL pending |
PCR5-38W240V | 4′ | 5″ | 240V | 38 | 0.158 | ETL pending |
PCR5-48W240V | 5′ | 5″ | 240V | 48 | 0.2 | ETL pending |
PCR5-98W240V | 10′ | 5″ | 240V | 98 | 0.408 | ETLpending |
PCR5-198W240V | 20′ | 5″ | 240V | 198 | 0.825 | ETL pending |
PCR5-248W240V | 25′ | 5″ | 240V | 248 | 1.03 | ETL pending |
PCRV10-69W240V | 3′ | 10″ | 240V | 69 | 0.288 | ETL pending |
PCRV10-113W40V | 5′ | 10″ | 240V | 113 | 0.471 | ETL pending |
PCRV10-233W240V | 10′ | 10″ | 240V | 233 | 0.971 | ETL pending |
Product | Type | Length | Use |
COR- 8 | Single Power Cord | 3′ | Connects Power to one course |
COR- 9 Power Cord | Double Power Cord | 3′ | Connects Power to two courses |
COR-12 Power Cord | Triple Power Cord | 3′ | Connects Power to three courses |
COR-4030-Jumper-S6 | Single Jumper | 6″ | Connects 1 female end to one male end |
COR-4030-Jumper-S | Single Jumper | 12″ | Connects 1 female end to one male end |
COR-4030-Jumper-S-18 | Single Jumper | 18″ | Connects 1 female end to one male end |
COR-4030-Jumper-D | Double Jumper | 12″ | Connects 1 male end to power and two female ends to 2 male ends |
COR-4030- Jumper-S-5 | Single Jumper | 5′ | Connects 1 female end to one male end |
COR-4030-Jumper-S-10 | Single Jumper | 10′ | Connects 1 female end to one male end |
COR-4030-Jumper-S-15 | Single Jumper | 15′ | Connects 1 female end to one male end |
ETO2-4550-PCR | OJ Controller & 2 Sensors | n/a | includes 1 moisture sensor, 1 air temperature sensor |
ETOR-55-US224 | OJ Moisture Sensor | n/a | individual sensor for 2nd zones |
ETF-744/99 | OJ Air Temperature Sensor | n/a | individual sensor |
Download Cord Accessory Guide
Download Controller FAQ
ETO2 Installation and Programming Guide
Download APP ET02 Short Guide
Download APP ET02 Heating cable over 16A Extern relay 24V
Download APP ET02 Heating cable over 16A Extern relay 115-240V
Download APP ET02 Heating cable over 16A, Extern relay 24V
Download APP ET02 Heating cable over 16A, Extern relay 115-240V
Download APP ET02 Heating cable, regular connection
Download ETO2 Controller
Download ETO2 Instructions
Download Face Front Diagram of ETO2 Wiring
Recommended Sensor Information:


